The function builds page table structures to map RISC-V BBL payload to supervisor mode. The function operates in machine level physical address space. You should not be fooled by presence of supervisor virtual addresses as they are adjusted to machine level physical address before being accessed.
static void supervisor_vm_init()
{
uintptr_t highest_va = DRAM_BASE - first_free_paddr;
mem_size = MIN(mem_size, highest_va - info.first_user_vaddr) & -MEGAPAGE_SIZE;
pte_t* sbi_pt = (pte_t*)(info.first_vaddr_after_user + info.load_offset);
memset(sbi_pt, 0, RISCV_PGSIZE);
pte_t* middle_pt = (void*)sbi_pt + RISCV_PGSIZE;
#if __riscv_xlen == 32
size_t num_middle_pts = 1;
pte_t* root_pt = middle_pt;
memset(root_pt, 0, RISCV_PGSIZE);
#else
size_t num_middle_pts = (-info.first_user_vaddr - 1) / GIGAPAGE_SIZE + 1;
pte_t* root_pt = (void*)middle_pt + num_middle_pts * RISCV_PGSIZE;
memset(middle_pt, 0, (num_middle_pts + 1) * RISCV_PGSIZE);
for (size_t i = 0; i < num_middle_pts; i++)
root_pt[(1<<RISCV_PGLEVEL_BITS)-num_middle_pts+i] = ptd_create(((uintptr_t)middle_pt >> RISCV_PGSHIFT) + i);
#endif
for (uintptr_t vaddr = info.first_user_vaddr, paddr = vaddr + info.load_offset, end = info.first_vaddr_after_user;
paddr < DRAM_BASE + mem_size; vaddr += MEGAPAGE_SIZE, paddr += MEGAPAGE_SIZE) {
int l2_shift = RISCV_PGLEVEL_BITS + RISCV_PGSHIFT;
size_t l2_idx = (info.first_user_vaddr >> l2_shift) & ((1 << RISCV_PGLEVEL_BITS)-1);
l2_idx += ((vaddr - info.first_user_vaddr) >> l2_shift);
middle_pt[l2_idx] = pte_create(paddr >> RISCV_PGSHIFT, PTE_G | PTE_R | PTE_W | PTE_X);
}
// map SBI at top of vaddr space
extern char _sbi_end;
uintptr_t num_sbi_pages = ((uintptr_t)&_sbi_end - DRAM_BASE - 1) / RISCV_PGSIZE + 1;
assert(num_sbi_pages <= (1 << RISCV_PGLEVEL_BITS));
for (uintptr_t i = 0; i < num_sbi_pages; i++) {
uintptr_t idx = (1 << RISCV_PGLEVEL_BITS) - num_sbi_pages + i;
sbi_pt[idx] = pte_create((DRAM_BASE / RISCV_PGSIZE) + i, PTE_G | PTE_R | PTE_X);
}
pte_t* sbi_pte = middle_pt + ((num_middle_pts << RISCV_PGLEVEL_BITS)-1);
assert(!*sbi_pte);
*sbi_pte = ptd_create((uintptr_t)sbi_pt >> RISCV_PGSHIFT);
mb();
root_page_table = root_pt;
write_csr(sptbr, (uintptr_t)root_pt >> RISCV_PGSHIFT);
}
Lets look on this function code flow.
uintptr_t highest_va = DRAM_BASE - first_free_paddr;
The above operation calculates the highest supervisor VA(virtual address) highest_va value. DRAM_BASE is less than first_free_paddr which is the address of the first free megapage after BBL+payload was loaded to DRAM starting at DRAM_BASE machine level address. On my test system DRAM_BASE = 0x80000000 and first_free_paddr = 0x82800000these are machine level physical adresses as CPU starts at machine level mode. The difference is a negative number which in two's complement arithmetic gives the valid virtual address at the top of the 64 bit address range highest_va = 0xfffffffffd800000 for supervisor mode. This leaves intact a top VA range in supervider mode thus preserving the machine level code which is mapped at this range, see below.
The info structure describes the payload with an ELF header. Typical values on my system for the Linux kernel as a payload as they are shown by GDB print command are
(gdb) p/x info
$6 = {entry = 0xffffffff80000000, first_user_vaddr = 0xffffffff80000000, first_vaddr_after_user = 0xffffffff803b2000, load_offset = 0x102800000}
The memory size available for machine level mode is
(gdb) p/x mem_size
$16 = 0x100000000
It should be adjusted for supervisor. The memory size available for supervisor is calculated as
mem_size = MIN(mem_size, highest_va - info.first_user_vaddr) & -MEGAPAGE_SIZE;
On my system this value is
(gdb) p/x $a5
$11 = 0x7d800000
Then the SBI page table is allocated. This page table is used to map the SBI BBL at the top of the address space.
pte_t* sbi_pt = (pte_t*)(info.first_vaddr_after_user + info.load_offset);
The sbi_pt value on my machine is
(gdb) p/x $s1
$15 = 0x82bb2000
As you can see the CPU works with machine level addresses while info.first_vaddr_after_user is a supervisor virtual address. The info.load_offset value is used to adjust the supervisor virtual address to machine level physical address.
Then the real supervisor page table address is calculated by allocating a middle/directory table just after sbi_pt
pte_t* middle_pt = (void*)sbi_pt + RISCV_PGSIZE;
Then the root page table pointer is initialized.
#if __riscv_xlen == 32
size_t num_middle_pts = 1;
pte_t* root_pt = middle_pt;
memset(root_pt, 0, RISCV_PGSIZE);
#else
size_t num_middle_pts = (-info.first_user_vaddr - 1) / GIGAPAGE_SIZE + 1;
pte_t* root_pt = (void*)middle_pt + num_middle_pts * RISCV_PGSIZE;
memset(middle_pt, 0, (num_middle_pts + 1) * RISCV_PGSIZE);
for (size_t i = 0; i < num_middle_pts; i++)
root_pt[(1<<RISCV_PGLEVEL_BITS)-num_middle_pts+i] = ptd_create(((uintptr_t)middle_pt >> RISCV_PGSHIFT) + i);
#endif
The supervisor page table structure is then initialized to map supervisor virtual addresses to machine level physical addresses. Look how info.load_offset is used again to translate supervisor virtual address to machine level physical address.
for (uintptr_t vaddr = info.first_user_vaddr, paddr = vaddr + info.load_offset, end = info.first_vaddr_after_user;
paddr < DRAM_BASE + mem_size; vaddr += MEGAPAGE_SIZE, paddr += MEGAPAGE_SIZE) {
int l2_shift = RISCV_PGLEVEL_BITS + RISCV_PGSHIFT;
size_t l2_idx = (info.first_user_vaddr >> l2_shift) & ((1 << RISCV_PGLEVEL_BITS)-1);
l2_idx += ((vaddr - info.first_user_vaddr) >> l2_shift);
middle_pt[l2_idx] = pte_create(paddr >> RISCV_PGSHIFT, PTE_G | PTE_R | PTE_W | PTE_X);
}
The machine level SBI BBL code is remapped at the top of the range reserved above highest_va through sbi_pt page table allocated early. The BBL has been loaded at DRAM_BASE machine level physical address. This address range is mapped as a read only range for supervisor mode. The PTE are also marked as global so they are visible in all address spaces.
// map SBI at top of vaddr space
extern char _sbi_end;
uintptr_t num_sbi_pages = ((uintptr_t)&_sbi_end - DRAM_BASE - 1) / RISCV_PGSIZE + 1;
assert(num_sbi_pages <= (1 << RISCV_PGLEVEL_BITS));
for (uintptr_t i = 0; i < num_sbi_pages; i++) {
uintptr_t idx = (1 << RISCV_PGLEVEL_BITS) - num_sbi_pages + i;
sbi_pt[idx] = pte_create((DRAM_BASE / RISCV_PGSIZE) + i, PTE_G | PTE_R | PTE_X);
}
After sbi_pt has been filled it is inserted in the superviser page directory. This establishes the mapping visible from supervisor level.
pte_t* sbi_pte = middle_pt + ((num_middle_pts << RISCV_PGLEVEL_BITS)-1);
assert(!*sbi_pte);
*sbi_pte = ptd_create((uintptr_t)sbi_pt >> RISCV_PGSHIFT);
Before returning to a caller the function sets page table base register for supervisor virtual address translation. The memory barrier guaranties that all memory writes has completed so the page table is in a consistent state.
mb();
root_page_table = root_pt;
write_csr(sptbr, (uintptr_t)root_pt >> RISCV_PGSHIFT);
P.S. BBL sets sptbr to the root_page_table value in enter_supervisor_mode which makes redundant the above call to write_csr(sptbr, (uintptr_t)root_pt >> RISCV_PGSHIFT);.
